12 Fibers Pigtails

Projects in the Philippines benefit from keeping the configuration, branch identification and installation requirement consistent across every participating site. The 12-fiber pigtail product line terminates multi-fiber backbone cable into connectorized panels: color-coded 0.9mm strands in unjacketed or bunch constructions, LC and SC interfaces in UPC or APC polish, on OS2 single-mode and OM3/OM4 multimode glass, plus MTP-12 versions that present a full parallel-optics trunk mounting point on one connector. Every leg is factory polished and optically tested, ready for the splice tray.

For projects in the Philippines, keep pigtail specifications consistent across buildings that share one panel design, and protect strands from contamination during transport between sites. Project teams in the Philippines can carry this requirement into the site documentation used by each contractor.

12 Fibers Pigtails

LC UPC to Unterminated Fiber Pigtail, 12 Fibers, Bunch, OM4
12-fiber LC UPC bunch pigtail on OM4 multimode for high-bandwidth panel termination.

MTP-12 APC Female to Unterminated Pigtail Trunk Cable, 144 Fibers, OS2
144-fiber MTP-12 APC pigtail trunk on OS2, terminating high-count backbone cable into twelve MTP ports.

MTP-12 APC Female to Unterminated Fiber Pigtail, 12 Fibers, OS2
MTP-12 APC female pigtail on OS2, 12 fibers for parallel-optics trunk termination.

MTP-12 UPC Female to Unterminated Fiber Pigtail, 12 Fibers, OM4
MTP-12 UPC female pigtail on OM4, 12 fibers for multimode parallel-optics panels.

LC UPC to Unterminated Fiber Pigtail, 12 Fibers, Bunch, OM3
12-fiber LC UPC bunch pigtail on OM3 multimode for 10G-grade panel termination.

SC APC to Unterminated Fiber Pigtail, 12 Fibers, Bunch, OS2
12-fiber SC APC bunch pigtail on OS2 for PON and FTTH splice shelves.

LC APC to Unterminated Fiber Pigtail, 12 Fibers, Bunch, OS2
12-fiber LC APC bunch pigtail on OS2, jacketed construction with color-coded 0.9mm legs.

SC UPC to Unterminated Fiber Pigtail, 12 Fibers, Bunch, OS2
12-fiber SC UPC bunch pigtail on OS2, factory-terminated legs ready for the splice tray.

LC UPC to Unterminated Fiber Pigtail, 12 Fibers, Bunch, OS2
12-fiber LC UPC bunch pigtail on OS2, jacketed distribution into color-coded 0.9mm legs.

SC APC to Unterminated Fiber Pigtail, 12 Fibers, Unjacketed Color-Coded, OS2
12-fiber SC APC unjacketed color-coded pigtail set on OS2, color-coded 0.9mm strands for fast splice matching.

LC APC to Unterminated Fiber Pigtail, 12 Fibers, Unjacketed Color-Coded, OS2
12-fiber LC APC unjacketed color-coded pigtail set on OS2 for high-return-loss splice points.

SC UPC to Unterminated Fiber Pigtail, 12 Fibers, Unjacketed Color-Coded, OS2
12-fiber SC UPC unjacketed color-coded pigtail set on OS2, factory-polished connectors for fusion splicing.

LC UPC to Unterminated Fiber Pigtail, 12 Fibers, Unjacketed Color-Coded, OS2
12-fiber LC UPC unjacketed color-coded pigtail set, OS2 bend-insensitive glass, 0.9mm strands for splice-tray work.

Determine bunch constructions where the factory-built assembly crosses open space between frames, and unjacketed sets where the strands stay inside protected enclosures.

Placing an Order and Factory Support

Every pigtail is factory terminated, polished and optically tested before packing. State the connector interface, polish, fiber mode, count, design and length with the inquiry, and the factory confirms the manufacturable specification with the quotation. Customers in the Philippines can include multi-site labeling or documentation requirements when requesting a project quotation.