10G SFP+ Passive DAC

The 10G SFP+ Passive DAC, 1m (3ft) is a passive twinax direct attach copper cable with SFP+ to SFP+, supporting 10Gbps links over a length of 1m (3ft). As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 10G Ethernet data center and enterprise network environments, and complies with 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel.

Product Highlights

• SFP+ to SFP+
• Data rate: 10Gbps
• Cable type: Passive Twinax
• Length: available from 0.5m (2ft) to 7m (23ft) in 10 standard options
• Operating temperature: 0 to 70°C (32 to 158°F)

In 10G Ethernet data center and enterprise network environments, the 10G SFP+ Passive DAC, 1m (3ft) provides a factory terminated 10Gbps link between SFP+ to SFP+ ports. This unit is supplied in 10 standard lengths from 0.5m (2ft) to 7m (23ft). It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. For networks standardized on Cisco hardware, it is a drop-in equivalent of the SFP-H10GB-CU1M.

On the compatibility side, this unit is the practical equivalent of the Cisco part SFP-H10GB-CU1M and works in Cisco systems out of the box. Standards compliance covers 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel.

This model carries part number SFP-10G-PC01. You can order this assembly in 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft), 4m (13ft), 5m (16ft), 6m (20ft) and 7m (23ft). Non-standard lengths can be produced on request. Wire gauge: 30AWG.

We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.

Default packaging is simple and protective: sealed bag, blister tray, export carton. For OEM customers we also offer white-label packing, custom printed boxes and per-unit labeling with your own part numbers, so the goods can go straight into your sales channel.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.

Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.