Customized MMC-24 Trunk Cable, 24-576 Fibers, OS2

Projects in the Philippines benefit from keeping the configuration, branch identification and installation requirement consistent across every participating site. This customized MMC-24 trunk uses 24-fiber MMC sub-units to create OS2 backbone assemblies from 24 to 576 fibers. Depending on design, the fiber cable outside diameter ranges from 4.0 to 18.0mm. APC interfaces, G.657.A1 bend-insensitive glass and plenum jacketing suit high-capacity single-mode links where deployment time and panel density are key design constraints.

Product Highlights

• MMC to MMC, 24-576 Fibers
• OS2 9/125μm, G.657.A1
• MMC insertion loss ≤0.35dB, return loss ≥60dB
• Trunk/ Extender Polarity wiring scheme
• 4.0-18.0mm Plenum (OFNP) cable
• Length and fiber count manufactured to the project requirement

Specifications

When a 24-fiber sub-unit is appropriate

MMC-24 design concentrates more fibers into each multi-fiber mounting point than MMC-16, which may reduce the number of sub-units in a large backbone. It additionally changes the fiber assignment at every termination. The connected panels and equipment patch leads should be suited to the equivalent 24-fiber organization; otherwise a 24-fiber trunk cannot be made compatible only by changing a label or adapter.

Mechanical planning for high-capacity routes

Across the customizable range, long-term tensile strength is 200–400N and short-term strength is 660–1320N, but the suitable design is governed by fiber count. A 576-fiber channel needs separate handling from a 24-fiber cord. Plan tray fill, pulling access, reel handling and the 20/10D dynamic/static bend criteria before selecting the final cable design.

A configuration built from the project drawing

No fixed standard length is assigned to this trunk. Orders are built to the applicable meter or foot length and may use trunk or extender polarity. Give the number of 24-fiber sub-units, connector gender, fan-out dimensions and identification scheme. The 4.0–18.0mm diameter range and fiber-count maximum are product line boundaries, not a promise that every combination has the equivalent design.

Ordering and Factory Support

Reference XXMMCSMF for the MMC-24 trunk product line and submit the applicable length, total fiber count and port map. Our support staff may then validate diameter, sub-unit arrangement, pulling criteria and tags before manufacturing the backbone. Customers in the Philippines can include multi-site labeling or documentation requirements when requesting a project quotation.