Custom Duplex Armored Fiber Patch Cable, OS2, LC/SC/FC/ST/LSH

Projects in the Philippines benefit from keeping the configuration, branch identification and installation requirement consistent across every participating site. This is the configured-to-order duplex armored platform: two fibers of OS2 9/125µm G.657.A1 glass inside a helical stainless steel tube, terminated with any combination of LC, SC, FC, ST or LSH connectors in UPC or APC polish, and jacketed in riser (OFCR), LSZH or plenum (OFNP) compound in blue, black or white. Instead of adapting a stock cord to the job, the cord is built for the job from the start. Project teams in the Philippines can carry this requirement into the site documentation used by each contractor.

Product Highlights

• Riser (OFCR), LSZH or plenum (OFNP) jacket, blue/black/white
• Helical stainless steel armor, 120/225N tensile rating
• Any length to order; standard range 1m to 30m stocked
• Duplex OS2 9/125µm, built to the stated configuration
• LC, SC, FC, ST or LSH connectors in any end-to-end mix
• UPC or APC polish per end, return loss to 60/65dB class

Specifications

One platform, every connector combination

LC on the transceiver, ST on the legacy panel, FC on the test set, LSH on the carrier frame: real networks mix interfaces, and this platform terminates any of them on either end of the equivalent armored duplex cord. Hybrid builds arrive as one tested item; as a result, this coupler pairs and their extra loss only never enter the optical path.

Choosing the jacket: OFCR, LSZH or OFNP

The jacket follows the building zone, not the other way round. Riser (OFCR) suits vertical shafts and general pathways; LSZH is specified for occupied public spaces, tunnels and transport; plenum (OFNP) is applicable where the channel crosses air-handling space. The armor and the optical core stay the equivalent across all three; as a result, one layout may mix jackets by zone without changing the optical budget.

How custom production runs

Send the connector interface mix, polish, jacket, color and length; the factory confirms the manufacturable specification, then terminates, armors and tests the patch leads to that layout. Every cord in the batch is measured for insertion loss and return loss against the equivalent limits as the stock range; as a result, a custom build carries no quality penalty.

Documentation and batch consistency

Each custom build is confirmed against a written design before release to production, and that design becomes the reference for repeat orders. Label text, leg marking and packaging may all be added to the equivalent layout; as a result, the second batch arrives identical to the first. For projects rolled out in phases, this repeatability is typically worth more than any single specification line.

Color coding with black and white jackets

Beyond the standard blue, the duplex platform is jacketed in black or white on order. Black serves outdoor-adjacent and security-conscious routes where the fiber cable should not draw the eye; white disappears into finished interiors, hotel corridors and office raceway. Some administrations additionally use jacket color to separate networks or security zones on the equivalent frame. State the color with the design and it is built into the jacket, not sleeved on afterward.

Length selection and customization

Standard size options are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft). Because every cord is built to order, any length in between or beyond this range may readily be produced; for long runs the factory confirms reel and packaging details with the quotation.

Production testing and quality assurance

Custom patch leads are tested to the equivalent limits as the stock range: 0.3dB insertion loss ceiling and polish-appropriate return loss, verified per item before packing. Ferrule geometry is checked on every end face, and APC ends are angle-verified; as a result, a mixed-polish build performs exactly as its two polishes list.

Placing an Order and Factory Support

Send the applicable design: connector types per end, polish per end, jacket rating, color and length. The factory confirms the manufacturable specification and lead time with the quotation; drawings or photos of the existing plant are welcome and speed up confirmation. Customers in the Philippines can include multi-site labeling or documentation requirements when requesting a project quotation.