LC to LC Duplex Armored Fiber Patch Cable, OM3, Riser (OFCR)

Projects in the Philippines benefit from keeping the configuration, branch identification and installation requirement consistent across every participating site. This duplex armored patch cable pairs two LC UPC connectors on an OM3 50/125µm multimode item protected by a helical stainless steel tube. The aqua 3.0mm riser-rated (OFCR) jacket keeps the cord flexible for cabinet and under-floor routing, and the steel armor inside takes the crush, pull and rodent exposure that would otherwise require metal conduit. Bend-insensitive OM3 glass holds attenuation steady around the tight turns of real cable pathways.

Product Highlights

• Riser (OFCR) flame rating for vertical building pathways
• Insertion loss ≤0.3dB, return loss ≥30dB
• Stock lengths 1m to 30m; custom lengths and jackets on request
• LC UPC to LC UPC duplex, OM3 50/125µm multimode
• Helical stainless steel armor against crush, impact and rodents
• Bend-insensitive OM3 fiber, 20/10D dynamic/static bend radius

Specifications

OM3 for 10G SR and legacy 40G links

OM3 remains the installed base for a huge share of enterprise multimode: it runs 10GBASE-SR to 300m and handles 40GBASE-SR4 over the in-row and in-room distances where those links were deployed. Where the existing optical path is OM3, adding an OM4 cord brings no measurable benefit; as a result, matching the cord to the plant keeps both cost and documentation clean. The duplex LC interface connects directly to SFP+ and QSFP breakout optics.

OM3 or OM4: choosing the right grade

The practical difference is modal bandwidth: OM4 extends 10G reach from 300m to 400m and gives 40/100G SR4 links more headroom. For new multimode builds, OM4 is typically the safer long-term alternative; for expansions of an OM3 plant, matching OM3 patch leads keep the inventory consistent. Both grades share this equivalent armored design; as a result, the mechanical protection is identical whichever optical grade the channel calls for.

Armor protection in shared pathways

Multimode backbones frequently cross spaces that were never designed as cable routes: retail ceilings, plant rooms, temporary event cabling. In those environments the biggest threat is mechanical, not optical. The helical steel tube inside this cord wraps the buffered fibers directly; as a result, the optical path survives foot traffic, moving equipment and rodent activity that would crush a standard jumper, and it does so without the cost and rigidity of conduit.

Mixed plants and clean documentation

Where OM3 and OM4 both exist in one building, color alone will not keep the records straight, given that both use aqua. Label each cord with its grade at both cable ends and keep the optical path records updated when links move. This product line shares one design across grades; as a result, the mechanical behavior is identical and only the glass changes; that makes mixed-grade sites simpler to document than sites mixing armored and unarmored patch leads.

Length selection and customization

Standard size options are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft), covering the common rack-to-rack, access and frame connections this cord is built for. Non-standard lengths beyond this range are manufactured to order. Because every meter of multimode glass adds 850nm attenuation, ordering the cord at the actual channel length is the simplest way to keep the optical path inside its optical budget. Specifying the particular channel length avoids both the slack storage problem of an overlong cord and the strain risk of one that is too short.

Production testing and quality assurance

Each completed assembly is terminated with precision zirconia ferrule connectors and verified for insertion loss and return loss before packing. The 0.3dB insertion loss figure is a tested limit, not a design target. Ferrule end faces are geometry-checked for predictable physical contact and rated for up to one thousand mating cycles.

Placing an Order and Factory Support

Refer to the LC-LC OM3 duplex armored product line when submitting a request for a quotation, and state the channel length and jacket rating. For other colors, polish types or connector mixes, the customized duplex armored program builds to the stated need once the factory confirms the specification. Customers in the Philippines can include multi-site labeling or documentation requirements when requesting a project quotation.